dscc 03029 www.vishay.com vishay vitramon revision: 28-feb-12 1 document number: 45042 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount multilayer ceramic chip capacitors dscc qualified type 03029 features ? us defense supply center approved ? federal stock control number, cage code shv71 ? small case size (0402) ? stable bp, br and bx dielectrics ? excellent aging characteristics ? lead (pb)-free termination code m ? tin/lead termination code z ? wet build process ? reliable noble metal electrode (nme) system ? made with a combination of design, materials and tight process control to achieve very high field reliability ? compliant to rohs directive 2011/65/eu ? halogen-free according to iec 61249-2-21 definition note * pb containing terminations are not rohs compliant, exemptions may apply applications ? broadband wireless communication ? satellite communication ? wifi (802.11) and wimax (802.16) ? subscriber based wireless devices ? microwave systems electrical specifications note ? electrical characteristics at + 25 c unless otherwise specified operating temperature: - 55 c to + 125 c capacitance range: bp: 0.5 pf to 180 pf br: 100 pf to 10 nf bx: 100 pf to 8.2 nf voltage range: 6.3 v dc to 100 v dc temperature coefficient of capacitance (tcc): bp: 0 ppm/c 30 ppm/c from - 55 c to + 125 c with zero (0) v dc applied bp: 0 ppm/c 30 ppm/c from - 55 c to + 125 c with 100 % rated v dc applied br: 15 % from - 55 c to + 125 c with zero (0) v dc applied br: + 15 %, - 40 % from - 55 c to + 125 c with 100 % rated v dc applied bx: 15 % from - 55 c to + 125 c with zero (0) v dc applied bx: + 15 %, - 25 % from - 55 c to + 125 c with 100 % rated v dc applied dissipation factor (df): bp: 0.15 % max. at 1.0 v rms and 1 mhz for values ? 1000 pf 0.15 % max. at 1.0 v rms and 1 khz for values > 1000 pf br, bx: ? 25 v: 3.5 % max. at 1.0 v rms and 1 khz ? 50 v: 2.5 % max. at 1.0 v rms and 1 khz aging rate: bp: 0 % maximum per decade br, bx: 1 % maximum per decade insulation resistance (ir): at + 25 c and rated voltage 100 000 m ? minimum or 1000 ? f, whichever is less at + 125 c and rated voltage 10 000 m ? minimum or 100 ? f, whichever is less dielectric strength test: performed per method 103 of eia-198-2-e. applied test voltages ? 200 v dc -rated: 250 % of rated voltage
dscc 03029 www.vishay.com vishay vitramon revision: 28-feb-12 2 document number: 45042 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? detail ratings see selection chart note (1) dc voltage rating should not be exceeded in application. other application factors may affect the mlcc performance. consult for questions: mlcc@vishay.com note ? metric equivalents are given for general information only quick reference data dielectric case maximum voltage (v) capacitance minimum maximum bp 0402 100 0.5 pf 180 pf br 0402 50 100 pf 10 nf bx 0402 50 100 pf 8.2 nf ordering information 03029- bx 102 b j z - t dscc number dielectric capacitance nominal code dc voltage rating (1) capacitance tolerance termination group c testing option packaging case code 0402 bp br bx expressed in picofarads (pf). the first two digits are significant, the third is a multiplier. an r indicates a decimal point. examples: 1r8 = 1.8 pf 101 = 100 pf w = 6.3 v x = 10 v y = 16 v z = 25 v a = 50 v b = 100 v c = 0.25 pf d = 0.5 pf f = 1 % g = 2 % j = 5 % k = 10 % m = 20 % note: c, d < 10 pf (bp) f, g, j, k, m ? 10 pf (bp) j, k, m (br, bx) m = silver palladium z = ni barrier with tin/lead plate min. 4 % lead c = full group c l = 2000 h life test only m = 1000 h life test only h = low voltage humidity test only - = no group c testing c = 7" reel/paper tape o = 7" reel/fla med paper tape j = 7" reel (low quantity) p = 11 1/4"/13" reel/paper tape i = 11 1/4"/13" re el/flamed paper tape b = bulk note: i and o are used for m termination code dimensions in inches (millimeters) part ordering number length (l) width (w) maximum thickness (t) termination pad (p) minimum maximum 03029- 0.040 0.004 (1.02 0.10) 0.020 0.004 (0.51 0.10) 0.024 (0.61) 0.004 (0.10) 0.016 (0.41) l w t max. p
dscc 03029 www.vishay.com vishay vitramon revision: 28-feb-12 3 document number: 45042 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 selection chart dielectric bp br bx style 03029 case code 0402 voltage (v dc ) 6.3 10 16 25 50 100 6.3 10 16 25 50 6.3 10 16 25 50 voltage code w x y z a b w x y z a w x y z a cap. code cap. 0r5 0.5 pf ? ????? r75 0.75 pf ? ????? 1r0 1.0 pf ? ????? 1r2 1.2 pf ? ????? 1r5 1.5 pf ? ????? 1r8 1.8 pf ? ????? 2r2 2.2 pf ? ????? 2r4 2.4 pf ? ????? 2r7 2.7 pf ? ????? 3r0 3.0 pf ? ????? 3r3 3.3 pf ? ????? 3r6 3.6 pf ? ????? 3r9 3.9 pf ? ????? 4r7 4.7 pf ? ????? 5r1 5.1 pf ? ????? 5r6 5.6 pf ? ????? 6r2 6.2 pf ? ????? 6r8 6.8 pf ? ????? 7r5 7.5 pf ? ????? 8r2 8.2 pf ? ????? 9r1 9.1 pf ? ????? 100 10 pf ? ????? 110 11 pf ? ????? 120 12 pf ? ????? 130 13 pf ? ????? 150 15 pf ? ????? 160 16 pf ? ????? 180 18 pf ? ????? 200 20 pf ? ????? 220 22 pf ? ????? 240 24 pf ? ????? 270 27 pf ? ????? 300 30 pf ? ????? 330 33 pf ? ????? 360 36 pf ? ????? 390 39 pf ? ????? 430 43 pf ? ????? 470 47 pf ? ????? 510 51 pf ? ????? 560 56 pf ? ????? 620 62 pf ? ????? 680 68 pf ? ????? 750 75 pf ? ????? 820 82 pf ? ????? 910 91 pf ? ?????
dscc 03029 www.vishay.com vishay vitramon revision: 28-feb-12 4 document number: 45042 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? see soldering recommendations wi thin this data book, or visit www.vishay.com/doc?45034 101 100 pf??????????????? ? 121 120 pf??????????????? ? 151 150 pf??????????????? ? 181 180 pf??????????????? ? 221 220 pf ????????? ? 271 270 pf ????????? ? 331 330 pf ????????? ? 391 390 pf ????????? ? 471 470 pf ????????? ? 561 560 pf ????????? ? 681 680 pf ????????? ? 821 820 pf ????????? ? 102 1.0 nf ????????? ? 122 1.2 nf ????????? ? 152 1.5 nf ????????? ? 182 1.8 nf ????????? 222 2.2 nf ????????? 272 2.7 nf ????????? 332 3.3 nf ????????? 392 3.9 nf ????????? 472 4.7 nf ???? ??? 562 5.6 nf ??? ??? 682 6.8 nf ??? ??? 822 8.2 nf ??? ??? 103 10 nf ??? 123 12 nf selection chart dielectric bp br bx style 03029 case code 0402 voltage (v dc ) 6.3 10 16 25 50 100 6.3 10 16 25 50 6.3 10 16 25 50 voltage code w x y z a b w x y z a w x y z a cap. code cap.
dscc 03029 www.vishay.com vishay vitramon revision: 28-feb-12 5 document number: 45042 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) reference: eia standard rs 481 - taping of surface mount components for automatic placement dscc packaging quantities (1) case code tape size 7" reel quantities 11 1/4" and 13" reel quantities bulk packaging code packaging co de vial packaging code c/o j p/i b 0402 8 mm 5000 1000 10 000 100 storage and handling conditions (1) store the components at 5 c to + 40 c ambient temperature and ? 70 % related humidity conditions. (2) the product is recommended to be used within a time-frame of 2 years after shipment. check solderability in case extended shelf life beyond the expiry date is needed. precautions: a. do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alka li, salt or the like are present. this may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. store products on the shelf and av oid exposure to mo isture or dust. c. do not expose products to excessive shoc k, vibration, direct sunlight and so on.
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
